“Stickers are NOT included and need to be purchased seperately. Stickers are available at Brickstickershop HERE
I present to you my Lego-fication of the 2018 Volkswagen ID.R, the recordholder for fastest EV around the Nürburgring, and several other aspects. This lego model is an accurate 1:30 scale representation of the real vehicle (1.29,2 to be exact). It measures over 10 studs wide, and 23 studs long. Some details include the battery in the cockpit next to the driver, the massive rear wing, the enormous side skirts, and the slick profile of the monocoque. All parts in medium azure can be chosen in any colour. About the real car:
The Volkswagen ID.R is the current recordholder of fastest EV around the famous Green Hell with a time of 6:05.336. It also holds other records, such as the Goodwood FOS hillclimb. The car in real life is 2350mm wide and 5219mm long, and with 979mm in height, it sits very low. Despite a 500 kW Lithium-ion battery, good for 671 hp, it weighs <1100 kg. It has a maximum top speed of 270 km/h, mainly limited by the nuge downforce and aero package, and can accerate from 0-100km/h in 2.25 seconds. The car features 3 main colour schemes:
gray: Pikes peak record climb
blue-black: Nürburg record time/ demo car
red-black: Tianmen road / heaven’s gate record hill climb. Stability of the rear wing:
This model has the largest ever wing for a speed champions car in existance. And with that, and lego in general, weight forms a potential issue. The model itself holds the wing up fine, but if you slam the car to the ground, or bump into it, the rear wing tends to sagg down. If desired, I designed a simply solution so the wing will stay upright no matter what, all necessary pieces are included in the parts list. Only a simple conversion is required:
Stickers:
I tried to minimize stickers for this model, and came out with 29 stickers in total. If you don’t like stickers, you do not need to apply all of them to get the ID.R look: you could leave out the front stickers on the front arches (replace the blue sloped curves with black ones to get the livery), the logos on the rear arches and the stickers on the wing-endplates. This leaves out 10 stickers. Again, My partners at Brickstickershop did a fantastic job on making this Lego ID.R look as close to the original as real life counterpart. Stickers are NOW available on Brickstickershop.com
This product is a building block toy set, intended for users within the age range specified on the packaging. Please read the following safety information carefully before use:
This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
Children should use this product under adult supervision to ensure safe play.
This product is not edible and should not be thrown, chewed, or used for purposes other than its intended use.
Small parts should be kept properly after opening the package to avoid loss or misuse.
Product appearance, colors, and contents may vary slightly between batches. Please refer to the actual product.
This product does not include display items, such as backgrounds or figures, nor does it include instructions, stickers, or other related accessories unless otherwise specified.
If you find missing or damaged pieces during assembly, please contact our customer support. We will assist as much as possible but are not responsible for damages caused by improper use.
All building brick parts sold on this website are produced by third-party manufacturers. We apply the highest standards to ensure product quality. While compatible with mainstream brands, these parts are not original products. This website functions solely as a reseller and is not involved in the design, manufacturing, or branding of the products. In the event of any intellectual property disputes, all associated responsibilities lie with the manufacturer. We assume no direct or indirect legal liability arising from such matters.
By using this product, you acknowledge and agree to the terms above.
We offer MOC customization services. If you have instructions and need custom parts, please feel free to contact us.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.